Previous versions of this Peg Perego part shown below
Gearbox Assembly / No Motor (set of 2) (SAGI9950XW)
Includes two complete gearboxes with ALL internal gears. Internal gears are not sold separately. Please find the corresponding SAGI9993 motors here.
!!! Important Part Notes !!!
These gearboxes fit on rear wheels with red 'X' shaped couplers. They will NOT fit on the old non-revised gators that require pentagon shaped couplers (typically gray in color). Simply look under your gator at the inside of your rear wheels where they connect to the gearboxes. If you see any red, these are the gearboxes you need.
Replacing your Gator's gearboxes is very straightforward; however, here's a step-by-step on how to remove the sometimes troublesome dump bed pins: Disconnect the hydraulic lift in order to lift the bed up all the way, use pliers or channel locks to turn the dump bed pin until the tab on the dump bed pin is visible, depress the tab with a flat head. While the tab is depressed, inch out the dump bed pin (easiest way is to use another flat head screwdriver) until is completely out. Repeat on other side, enjoy your new gearboxes!